FERTAN RUST CONVERTER CORROSION TREATMENT KILLER STOP PROTECTION PAINT SPRAY
Choose size from the options list
Fertan Rust Converter is well know and trusted as one of the best rust treatments worldwide.
Fertan Rust Converter penetrates rust, destroying it by converting it to a bonded layer of hard black iron tannate which is ready for painting.
Unlike other rust treatments, it also lays down a fine coating of zinc phosphate on the good steel underneath to prevent rust occurring again.
The solutions thin consistency allows it to creep into seams and folded surfaces like mudguard edges, so it treats rust where conventional treatments cannot reach.
Perfect for treating the inside of fuel tanks too.
Fertan Rust Converter works at a molecular level and so is also recommended for apparently good clean steel which will always be harbouring rust in its pores.
Fertan is suitable for treating steel and iron surfaces, even if they have to be left for weeks or months prior to final painting. Rust is removed and prevented from re-forming for up to six months so delays in your painting schedule will not be a disaster. Fertan can be overcoated with oil or water based paints, epoxy, lacquer, wax etc.
Fertan converts loose rust to powder that can be rinsed away leaving a converted stable and inert surface.
Fertan when kept in closed containers and reasonable conditions has an unlimited shelf life.
Application is simple and safe….
Brush off loose rust and remove dirt, oil or silicone products that will prevent Fertan reaching the metal surface.
Apply Fertan by brush, roller or spray and leave for 24 hours, extending this to 48 hours in low temperatures.
The surface can now be rinsed off and overpainted. The overpainting can be left for weeks, months or years depending on the environmental conditions.
Do try Fertan Rust Converter, it should be the end of your search for an effective answer to rust.
A uniquely effective solution, that we personally use ourselves for many years.
Choose size from the options list
Fertan Rust Converter is well know and trusted as one of the best rust treatments worldwide.
Fertan Rust Converter penetrates rust, destroying it by converting it to a bonded layer of hard black iron tannate which is ready for painting.
Unlike other rust treatments, it also lays down a fine coating of zinc phosphate on the good steel underneath to prevent rust occurring again.
The solutions thin consistency allows it to creep into seams and folded surfaces like mudguard edges, so it treats rust where conventional treatments cannot reach.
Perfect for treating the inside of fuel tanks too.
Fertan Rust Converter works at a molecular level and so is also recommended for apparently good clean steel which will always be harbouring rust in its pores.
Fertan is suitable for treating steel and iron surfaces, even if they have to be left for weeks or months prior to final painting. Rust is removed and prevented from re-forming for up to six months so delays in your painting schedule will not be a disaster. Fertan can be overcoated with oil or water based paints, epoxy, lacquer, wax etc.
Fertan converts loose rust to powder that can be rinsed away leaving a converted stable and inert surface.
Fertan when kept in closed containers and reasonable conditions has an unlimited shelf life.
Application is simple and safe….
Brush off loose rust and remove dirt, oil or silicone products that will prevent Fertan reaching the metal surface.
Apply Fertan by brush, roller or spray and leave for 24 hours, extending this to 48 hours in low temperatures.
The surface can now be rinsed off and overpainted. The overpainting can be left for weeks, months or years depending on the environmental conditions.
Do try Fertan Rust Converter, it should be the end of your search for an effective answer to rust.
A uniquely effective solution, that we personally use ourselves for many years.
